Automotive Locksmithing

  • TKO

    The TKO is a professional programming tool that features integrated hardware, enhanced operating software and simple cable connections. Visit our web site, Literature & Support, Automotive Products for the latest software updates, guides, videos and...

    Product • April 1st, 2011

  • Locksmithing Etc.

    News You Can Use

    Article • April 1st, 2011

  • VATS Bypass Module #VBM54

           The Vats Bypass Module #VBM054 is designed for those times when the vats ignition lock fails, due to the wires breaking off in the steering column, up near the head of the lock or the touch pads where the key meets the lock. It is suited...

    Product • March 31st, 2011

  • Wafer Popper Pliers #WP045

    The ‘Wafer Popper’ will pop those stubborn or stuck wafer from cam lock right out. The tool is an easy one hand operation with a study tooth, spring loaded handle for easy operation and cushioned grips for many years of easy  comfortable use. One...

    Product • March 31st, 2011

  • Facecap Removal Tool #FCP42

    The Multi-purpose Face Cap Tool, will remove a face cap from the lock housing with very minimal damage and the same face cap can be reused after the repairs have been made to the lock. This tool has a specially designed hardened tip and saddle and is...

    Product • March 31st, 2011

  • Bianchi TK100

    The Bianchi TK100 chip combines the TK24, TK40 and TK60 into one universal chip that services 1,500+ vehicle applications and over 90 percent of transponder vehicles on the road today. The battery-less TK100 is reprogrammable and allows 884 owners to...

    Product • March 31st, 2011

  • Programming The 2009 Honda Fit Using the TKO

    Vehicle engine immobilizer programming has evolved beyond on-board programming methods and manufacturer-dedicated tools to the “fits most non-proprietary” vehicle makes and models programming devices. With more than 350 vehicle makes and models...

    Article • February 4th, 2011

  • Bianchi Laser 994

    The Bianchi Laser 994 has expanded capabilities with the introduction of a new jaw for edge cut keys. The ‘F’ jaw can be purchased with a new machine or added to an existing machine in the field. A new 1.5mm cutter, tracer and magnetic tip stop...

    Product • January 31st, 2011

  • Time To Trade-in your Transponder Programmer?

    In order to compete, an automotive locksmith needs to have just about all of the most up-to-date equipment available. That’s easily said, but not always financially possible or practical. We have written about the different programming equipment...

    Article • January 31st, 2011

  • Servicing the Ford Fiesta, Part 2

    The new Ford Fiesta uses the new high-security side-milled lock system that Ford plans to phase in on all of their vehicles worldwide.  It also has a transponder system that is essentially the same as other Ford products.  It features an easily...

    Article • January 14th, 2011

  • Locksmithing Etc.

    BAUER RV SERIES Bauer Products has the RV Code Series, which is RV301-RV370. This code series uses the Bauer RV key blank or newly introduced Ilco 1676 (EZ BAU3). We are looking for the key codes and if you have collected any we would appreciate...

    Article • January 7th, 2011

  • 2010 Locksmith Ledger Editorial Index

    This reference is issued as a continuation of the annual Locksmith Ledger Editorial Index. The listings cover the material that was published in the Locksmith Ledger during 2010. The purpose of this section, as well as previous supplements, is to...

    Article • January 5th, 2011

  • Locksmithing Etc.

    AN ARGUMENT AGAINST VAN SIGNS Many locksmiths have some form of signage on their service vehicles. It has been an excellent way to attract attention and gain new business. Unfortunately signs can also attract unwanted attention. Driving an unmarked...

    Article • January 5th, 2011

  • Servicing The 2011 Ford Fiesta

    The new Ford Fiesta uses the new high-security side-milled lock system that Ford plans to phase in worldwide. It also has a transponder system that is essentially the same as other Ford products.

    Article • January 5th, 2011

  • BigEasy Carrying Case

    Steck Manufacturing Company announces that we have upgraded our BigEasy Carrying Case, PN 32935 by adding snaps to the component section as well as adding stronger Velcro strips.

    Product • December 15th, 2010