Gator Tools

Gator Tools

gatorad091_10251870.png

We manufacture these products:

  •      FCP42 (Face Cap Pliers) These pliers are new and improved. Easier grip, wider base to hold the lock & double sided tips to give you twice the life. Repair parts are available
  •      WP45 (Wafer Popper Pliers) This tool is a must for anyone working on wafer locks.  Click, Click, Click… It’s just that quick. Repair parts are available
  •      VBM54 (VATS Bypass Module) No more steering column tear down when the VATS wires break or the contacts wear out. Just plug into the wiring harness flip a switch and get paid.
  •      MW53 (Mortise Lock Wrench) When you have mortise lock that need a bit more leverage from rust or corrosion.
  •      MS056 (Mortise Socket) For those stubborn and expensive mortise locks too costly to tear up.
  •      LSH058 (Locksmith Hammer) two sizes available works in those tight place where no other hammer will work.

 

All of these tools are made for the locksmith industry, by working locksmiths. All our tools are MADE IN THE USA, We sell to wholesalers within the locksmithing industry. Visit us on FaceBook facebook.com/GatorTools

 

  • 5030 Filarees Circle
  • Colorado Springs, CO 80917
  • USA
  • Phone: 719-591-8343
  • Toll Free:
  • Fax: 719-550-0953
  • Website: http://www.gatortools.com

Want to know more about Gator Tools Get Info Now

Expand for more details on this Company

Mortise Socket #MS056

Product From Gator Tools

     The Mortise Socket is a innovative tool for the locksmithing and aluminum store front service industry. Many time the mortise lock will get cross threaded, and become extremely tight or hard to remove. If the lock your working on is an expensive high security lock, you can now remove it with the Mortise Socket made by Gator Tools Co.

Get Info Now

VATS Bypass Module #VBM54

Product From Gator Tools

       The Vats Bypass Module #VBM054 is designed for those times when the vats ignition lock fails, due to the wires breaking off in the steering column, up near the head of the lock or the touch pads where the key meets the lock. It is suited for those times when tearing down the steering column is not an options and the security of the key or car is not an issue.

Get Info Now

Wafer Popper Pliers #WP045

Product From Gator Tools

The ‘Wafer Popper’ will pop those stubborn or stuck wafer from cam lock right out. The tool is an easy one hand operation with a study tooth, spring loaded handle for easy operation and cushioned grips for many years of easy  comfortable use. One of the quickest ways to remove standard and staggered can lock wafers. This is your best protection from damaging cores or wafers.

Get Info Now

Facecap Removal Tool #FCP42

Product From Gator Tools

The Multi-purpose Face Cap Tool, will remove a face cap from the lock housing with very minimal damage and the same face cap can be reused after the repairs have been made to the lock. This tool has a specially designed hardened tip and saddle and is fully adjustable to accommodate most any size of face caps. It requires a minimum amount of adjusting to give a professional look after reinstallation of the face cap. The Multi-purpose Face Cap Tool is a hearty tool with a durable finish to resist weather. The installed torsion spring helps open the tool, making the tool a breeze to use. The tip is made of hardened material for long wear, but if broken can be replaced.

Get Info Now

Mortise Lock Wrench #MW053

Product From Gator Tools

Mortise wrench is designed to remove mortise locks that are installed in aluminum storefront doors. It will remove standard locks, thumb turns and dummy cylinders. It will work well with security collars and without. Made of non-maring material to avoid scratching of painted surfaces.

Get Info Now