Locksmithing etc. Dec. 2012

Lockitron Lock Technology Lockitron is a manufacturer of keyless entry using your phone. Their product is mounted over the thumbturn, having a larger turn knob in the center. The Lockitron connects to the residence’s Wifi and can be operated using a...


 

Use the Slide Lock AutoBuster III™ car-opening tool and two slim wedges to unlock the front passenger door locking mechanism. Insert the two wedges to accommodate the car-opening tool at the forward edge of the window opening. Carefully insert the AutoBuster III with the tip pointing rearward. Lower the tool until the loop is beneath the weather stripping. Remove the two wedges. Rotate the car-opening tool until loop is on the passenger compartment side of the window. Slowly maneuver the tool until the tip is within the passenger compartment. Manipulate the tip of the tool until it contacts the manual lock-unlock button. Use the tip of the tool to unlock the locking mechanism. Pull on the outside door handle and open the door. Carefully remove the tool according to manufacturer’s instructions.

 

Use the Tech-Train Productions TT-1026 car-opening tool to unlock the front passenger door locking mechanism. Insert two wedges on each side of the inside door handle assembly, providing enough room for inserting and manipulating the car-opening tool. Carefully insert the TT-1026 tool into the door cavity with the tip facing forward. Lower the tool until the upper bend is below the bottom of the window glass. Rotate the tool a few degrees counterclockwise until the bend is on the passenger compartment side of the window. Carefully raise the tool up along the window glass. Stop once the bend begins to show. Remove the wedges. Raise the tool until the tip is inside the passenger compartment.

Manipulate the tool until you contact the lock control. Flip the lock control to the unlocked position to unlock the locking mechanism. Pull on the outside door handle and open the door. Carefully remove the tool according to manufacturer’s instructions.

The direction to rotate the driver’s door lock plug to the unlocked position is counter clockwise.

For more information, contact your local locksmith distributor or the following car-opening tool manufacturers.

High Tech Tools, 1628 NW 28th St., Miami, FL 33142. Telephone: 800-323-8324. Fax: 305-635-1015. Website: www.hightechtools.com.

Pro-Lok, 655 North Hariton Street, Orange, CA 92868. Telephone: 714-633-0681. Fax: 714-633-0470. Website: www.pro-lok.com.

Slide Lock Tool Co. Inc., 1166 Topside Rd., Louisville, TN 37777. Telephone: 800-336-8812 Website: www.z-tool.com.

Lockmasters Inc., 2101 John C. Watts Drive, Nicholasville, KY 40356. Telephone: 800-654-0637. Fax: 859-885-7093. Website: www.lockmasters.com.

 

We are interested in printing opening methods from other car opening tool manufacturers. To have your instructions published, contact Jerry Levine C/O Locksmith Ledger, 3030 Salt Creek Lane, Suite 200, Arlington Heights, IL 60005. Fax: 847-454-2759. E-mail: jerry.levine@cygnus.com.

 

 

We Recommend