ISC / Security Showcase

A review of the products on display at ISC West 2006, April 5-7 in Las Vegas.

Command Access ISC Booth 22114 New from Command Access are three cost-effective, state-of-the-art power supplies: the PS200, PS400 and PS800. They are available in two-, four- and eight-input/output versions. The units are loaded with features and are designed to safely and intelligently drive...

To access the remainder of this piece of premium content, you must be registered with Locksmith Ledger. Already have an account? Login

Register in seconds by connecting with your preferred Social Network.


Complete the registration form.


DORMA Architectural Hardware introduces a family of robust, highly versatile arm systems designed for superior control and maximum efficiency. DORMA S-DS and S-IS Spring Assist arm systems are designed to control doors in, high traffic, high abuse applications and provide quiet operation. The Spring Assist Arms are ideal for educational facilities, health care applications, hospitality, retail and other applications that are subject to abusive pedestrian traffic.

For more information, visit Indicate 410 on eInquiry

Olympus Lock
Olympus Lock’s reinforcing trim spacers and templates provide through-bolt mounting of Olympus cabinet locks and increase the security of your installation. The 1/4” trim spacer allows for flush mounting of the cabinet lock face (depending on material thickness). Trim spacer templates can be used as a 1/8” shim and allow for proper mounting-hole placement of the trim spacer.

For more information, call 800-525-0954 or visit Indicate 417 on eInquiry

ISC Booth 18108
Introducing the RCI TD365 fully programmable, 365 day/24 hour, multiple event timer. The timer can perform up to 99 daily/weekly independent events. Daylight Savings time is no problem; simply select the DS mode and automatic adjustment will occur. The “First Person In” feature is designed to delay the automatic disarming of a security system until the first person with authorized access arrives at the protected premises.

For more information, visit Indicate 419 on eInquiry

ISC Booth 26073
SDC’s new Z7200 ANSI Grade 1 electrified cylindrical lockset features a SPDT request-to-exit output, standard with all models. Additional features include a choice of failsafe or failsecure mode, clutch for abuse and vandal resistance, dual 12/24VDC input, ‘C’ type keyway, or optional I-Core. All lever handle styles are ADA compliant with choice of architectural finish. Operation includes access control or key entry. The inside lever provides egress at all times while activating a request-to-exit signal output. SDC locksets are UL Listed and approved for use on 3 hour fire rated doors, including stairwell doors where the use of magnetic locks and electric strikes is prohibited.

For more information, visit Indicate 421 on eInquiry

Midwest Wholesale Hardware
Are you still unsure about electrified hardware? Midwest Wholesale Hardware can help. Use our online electrified hardware manual at It is complete with the elevation diagram, system operation, schedule and hardware list.

For more information, call 800 821 8527 (Kansas City, MO); 800 659 8527 (Orlando) or 888 707 8527 (Visalia, CA). Indicate 416 on eInquiry

ISC Booth 8075
The SARGENT Profile Series v.N1 lockset integrates into existing open architecture Wiegand access control systems, giving end users the ability to easily expand their system with a simple panel interface board and no additional software. The v.N1 is available with both keypad and proximity or proximity alone and features door monitoring and tampering alert capabilities. Access control information is transferred between the lock and an interface module utilizing (RS485) communications.

The access control capabilities are further supported by the physical security features of a SARGENT ANSI/BHMA Grade 1 mechanical locking device. The v.N1 is available on SARGENT’s 8200 Series mortise lock, 10 Line cylindrical lock and 80 Series exit device.

For information, call 800-810-WIRE or visit Indicate 420 on eInquiry

Marks USA
ISC Booth 24108
The Marks USA i-Que HID proximity card standalone lockset accepts most HID format cards and fobs for keyless entry, but can be programmed to combine with the keypad for maximum security. This lockset has an HID prox antenna and is available with flush or tactile metal 16-digit keypad on a heavy duty cast housing available in a range of architectural finishes. The basic model allows 3008 users with an 1180-event audit trail.

The i-Que PROX units are available in cylindrical, mortise, tubular and exit device versions. Marks USA locksets are backed by a lifetime mechanical and electronic warranties, meet grade 1 and UL standards and are ADA compliant.

For information, call (631) 225-5400or e-mail Indicate 415 on eInquiry

We Recommend