Rekeying the Monarch 19-R Exit Device
A dependable workhorse, the 19 Series exit device is an economical answer to a variety of exit needs. It’s available in panic or B label (1 1/2 hr.) fire exit construction. The 19 Series comes with a full complement of trim.
For this article, I will rekey the Monarch 19-R exit device installed onto a metal clad wood door. The exterior trim is the 1912 L-Control-Sutro, a rectangular plate equipped with a mortise cylinder to mechanically control access. The key operating the mortise cylinder locks or unlocks the trim. The...
To access the remainder of this piece of premium content, you must be registered with Locksmith Ledger. Already have an account? Login
Register in seconds by connecting with your preferred Social Network.
Complete the registration form.
M07- Inside of trim
M08- Remove cam from mortise cylinder
M09- Remove plug using follower
M10- Install trim
M11- Align tailpiece
M13- Finished
We Recommend
-
Article
Rekeying the Monarch 19-R Exit Device
A dependable workhorse, the 19 Series exit device is an economical answer to a variety of exit needs. It’s available in panic or B label (1 1/2 hr.) fire exit construction. The 19 Series comes...
-
Article
Adams Rite eFORCE 150: Retrofit Aluminum Glass Storefront Door
The Adams Rite eForce 150 takes the place of the exterior trim and changes the operation of the mortise cylinder to mechanical override. We installed the eForce onto a section of narrow stile...
-
Article
Installing the Von Duprin XP98/XP99 Center Case Retrofit For Rim Exit Devices
Warranty: 3 Years Time to Install: 45 minutes to one hour Tools: 10-24 tap, 1/4-20 tap, drill bits, tools to adjust door closer, drill motor, 5/64" hex wrench I was invited to...
-
Article
Installing a Sargent Electric Exit Device
The SARGENT 56-8813 electrified exit device with trim was installed onto a Curries hollow metal door.
