Fire Alarm Disconnect:
– Normally Closed FACP trigger input.
– Programmable Fire Alarm Disconnect options:
a) Removes power to outputs and disables delayed follower relays.
b) Connects power to lock outputs and enables delayed follower relays.
Enclosure accommodates up to two (2) 12VDC/7AH batteries.
Dimensions: 13.5”H x 13”W x 3.25”D.
For information on Altronix products, contact your local locksmith distributor or visit www.altronix.com..
Power over Ethernet (PoE), and Power over Lan (PoL) are technology that allows both data and power to be provided over an Ethernet cable to an endpoint device such as an IP video camera, card reader, telephone or wireless access point.
By putting the power for the endpoint device over the Ethernet cable, it eliminates the expense associated with providing separate cabling and equipment to an endpoint.
By adding Power Sourcing Equipment (PSE) called Endspan Equipment into the Ethernet switch, or by adding Midspan Power Insertion Equipment after the Ethernet switch will combine the data and power at the source to be sent through the Ethernet cable. The power from the Ethernet cable can then be tapped at the endpoint with a Powered Device (PD) to operate the access point.
Under normal operation the PSE supplies a nominal DC. Voltage of 48V at 15.4 W
Altronix NetWay8/NetWay16 are Midspans designed for use with PoE and non-PoE compliant IP video surveillance cameras with non-PoE switches to provide power and pass data (video) for PoE compliant cameras/devices.
They are available with eight or 16 ports in a space-saving 1U EIA 19” rack mount chassis. Cameras/devices may be located up to 100m (328 ft.) from the NetWay unit.
A NetWayXT repeater module can be utilized to extend the distance an additional 100m (328 ft.) for a total range of up to 200m (656 ft.). A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement.
Since many existing IP cameras are not PoE, NetWay Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras by utilizing NetWay1512 or NetWay3012 adapters. These are modules which have the required Category RJ-45 jacks as well as voltage output terminals.
Choosing the right power supply is crucial for your electronic access control or CCTV installation.